For those who don’t know much about him, I recommend watching the movie Revolution OS. It does a good job showing what he was working towards.
For those who don’t know much about him, I recommend watching the movie Revolution OS. It does a good job showing what he was working towards.
The official framework mainboard 3d printed case uses a compliant mechanism to push the power button, you can take at look at the open source STL files to see how they designed it for inspiration/reference.
https://github.com/FrameworkComputer/Framework-Laptop-13/tree/main/Mainboard/Printable Case
I do something similar with opnsense and policy based routing. opnsense is acting as both a VPN client and server. The client interface connects out to a commercial VPN, and the server interface listens for incoming connections. Based on what I I want to accomplish I setup firewall rules that use policy based routing to route incoming VPN traffic where it needs to go.
Regarding split tunnel on the client, the Android wireguard app has the option to specify what traffic uses the tunnel based on the application
I really enjoy reading in my hammock. Usually I set it up in my backyard but it’s also easy to take to a park or on a hike. I just use one of those camping ones that packs away to the size of a nalgene water bottle.
Sidenote, I also use one of these security straps on my e-reader. It allows me to read laying down in the hammock or in bed without having to completely hold onto my reader. Definitely recommend.
I just started tears of the kingdom a few days ago.
I’ve had my fw 13 since early Feb 2022. So far, I’ve replaced the hinges and upgraded to a new mainboard. (11th gen i5 to 12 gen i7 when it became my main PC).
I’ve redone the thermal paste on the 12th gen 2 times already to clean the fan out and have not had any problems opening things up. I open it up so often to tinker that the pull loop on the keyboard cable finally broke on me a few weeks ago.
My old mainboard is currently running my entire homlab. Opnsense, pihole, Plex, Kavita, audiobookshelf, foundry vtt, *arrs, unifi controller. I threw it into a 3d printed case and its been running fine without any issues.
I thought about upgrading to the fw16, but it’s too expensive for me to justify it. If I want to game I just plug into my eGPU. I don’t need my gaming system to be ultra portable.
I’ll probably upgrade again when they release a new ryzen mainboard that has USB 4 2.0 support so I can take advantage of the additional pcie bandwidth for my GPU.
I would reccomend the fw13 to anyone who is into customizing PCs or is passionate about repairability in the electronics they own.
Is the NIC built into the motherboard or an add on pcie card?
You could check the journal to see if the logs tell you anything.
You could try taking some packet captures from opnsense and your server while accessing your externally available web server. Reviewing the pcaps might give you some hints on how fix it based on what behaviour you see in the captures.
Aptera is doing this with custom solar cells and they claim it’ll provide up to 40 miles of range per day. https://aptera.us/
This is how I would do it also, assuming you aernt passing the NICs through to VMs
Once you change your DNS server in your router, make sure to renew your clients DHCP lease. It may still be using the stale DNS server. On windows verify its using the new DNS server with: ipconfig /all
Can you ping the server from your phone successfully? You can use an app like this to check: https://play.google.com/store/apps/details?id=net.he.networktools
Making sure you have layer 3 connectivity first would be a good first step. If you don’t, I would start by troubleshooting at layer 2. Run a packet capture on both your phone and server while trying to connect to determine where the disconnect is. Make sure ARP is resolving properly.
If layer 3 IS working, move up to layer 4 and make sure you are using the correct port, http vs https, etc
LocalSend, a cross platform alternative to airdrop and nearby share.
My family uses it for almost all of our filesharing. IPhone to android, iPhone to windows PC, android to macbook, etc. Its works really, really well.
No issues jumping straight from 37 server edition to 40.
This website has a bunch of great practice “wargames”. You’ll learn a bunch about common linux commands and the different options for them. It also provides you with some great tips on what to google if you get stuck. I reccomend starting with bandit.
+1 for openscad. I switched over from Fusion 360 back when autodesk changed the personal use license in 2020.
It takes a bit to get used to it, but once you’ve made a few parts you begin to see how powerful it can really be.
Its also super lightweight, so you can run it on most systems without any issues. I’ve ran in on a chromebook before.
The only thing I miss about fusion 360 is an easy way to add fillets to parts, that can be tricky in openscad. I use chamfers for the most part though, so I don’t miss it much.
The blue chat bubble is signal
Whenever I’ve pushed through and attempted to finish a book that I do not enjoy, I end up shelving reading as a hobby for a long period of time.
So I decided to just stop trying and if I don’t enjoy them, I stop. There are too many good books to read out there for me to try to force feed one to myself.
Only in the last few years have I realized how much stuff he has been in or worked on in a short amount of time. I hope he is enjoying life out of the big spotlight.