The article title is misleading, but the research is interesting. Essentially it’s saying that when the rocket self-destructed due to it performing off nominal (as the first test ever of this vehicle) it ionized a large swath of the ionosphere from Mexico to the SE US which can impact the accuracy of GPS for systems that require high precision. The ionosphere reionizes very quickly naturally though so the effects are short lived (hours to maybe a day) and the impact to navigation at least should be small because of how GNSS works with built in corrections for exactly these types of errors. It feels like Nature is stretching a bit with the doom and gloom headline that the authors don’t even point to in the article (though I have not read the paper to be fair).

Like most here I work in IT. Unlike most here I have a BS in earth sciences (meteorology). While in school I did some summer volunteer work for the NWS near my home outside of DC that I found through an Alum that worked there. After I finished school that turned into a full time federal contractor position doing instrumentation testing and design. The facility was smaller and so I split my time with my friend (the alum that helped me in the first place) doing IT work. A few years down the road and I got a masters in information security (because sometimes a piece of paper matters). I turned that into a full time IT position at the same facility (still as a contractor).

For personal reasons I later moved out of state which was pretty difficult to find a job, most places assume you want relocation assistance or otherwise aren’t interested in out of state applicants. I used an employment agency to help, and got a good job as a jack of all trades IT admin at a small engineering company (about 200 employees total). I stayed there for a few years before moving to a large enterprise. I wanted to go somewhere with growth potential. I liked that job and made a lot of great friends and professional contacts. I ended up leaving for a verity of reasons (bad management, poor company outlook, and seeking more stability).

I eventually found my current job through someone I was working with who moved to my current company. I work for a national laboratory doing IT security work making good money in a super stable career (I’m a contractor so protected from a lot of the politics but the lab does work for the DOD so funding is never really in question).

My general tips would be:

1. Get to know alum at your school (if you choose to go to school)
2. Don’t be afraid to work outside your major
3. Start broad then generalize. I work with tons of folks that specialized in their field from the start, and while they are super smart at the one thing, they are locked into it and often can’t see the forest through the trees. Having a broad base makes it way easier to ask questions that help move projects forward.
4. Ask dumb questions. Chances are if you don’t understand it, others don’t either. Don’t be afraid to look ignorant, every good manager I’ve ever worked for has rewarded curiosity and questioning as long as it’s productive generally.
5. Know when to cut your losses and look elsewhere. This may be the millennial in me, but you don’t owe your company anything. Know when you’re unhappy and talk with management to see if there’s a solution. If not (or if management is the problem) look to move somewhere else.
6. Goes with the above but the best time to find a job (and usually a promotion with it) is when you have a job.

Link doesn’t work with ad blockers, archive.is link here: https://archive.is/TcDlm

From my reading this is misleading at best and likely wrong. I don’t work with CrowdStrike Falcon but have installed and maintained very similar EDR tools in enterprise environments and the channel updates referenced are the modern version of definition updates for a classic AV engine. Being up to date is the entire point and so typically there are only global options to either grab those updates from the vendor or host them internally on a central server but you wouldn’t want to slow roll or stage those updates since that fundamentally reduces the protection from zero days and novel attacks that the product is specifically there to detect and stop. These are not engine updates in that they don’t change the code that is running, they give the code new information about what an attack will look like to allow it to detect malicious activity as soon as CrowdStrike knows what the IoCs look like.

In this case it appears that one of these updates pointed to a bad memory location which caused the engine to crash the OS, but it wasn’t a code update that did it (like a software patch). That should have been caught in QA checks prior to the channel update being pushed out, but it’s in CrowdStrikes interest to push these updates to all of their customers PCs as quickly as they can to allow detection of novel attacks.

For me as the driver of not one of these cars, I think the driver monitoring and sheeting is perhaps one of the most important parts of these systems. I 100% want your car to scream at you for not paying attention while use the driver assist features because it’s such a common and easy thing to do (if it works 99 times without issues, human nature is to assume it will work that 100th time, so checking that email from work real quick is probably fine). When the consequences of a driver failing to post attention while using these systems is potentially other people dying in a horrific crash, your discomfort at an alert because you happen to be a perfect driver that never does other things in the car while driving doesn’t matter.

Surely not Maslow or MB, both have so many exception’s and so little real science behind them they just aren’t really useful things for the majority of people.

Trees and scratchers are a must, cats usually scratch furniture because there isn’t something else nearby to use. Trees give them a place to climb and feel safe up away from things. You should also have places for them to hide (boxes, piles of blankets, a bed in a quiet room, etc). As for toys, it really depends on the cat. Ours is super picky and only likes specific rattle balls from Amazon, small rattle mice, and some kickers (there are few others but they are all small and easy for her to cray around). But for every one toy we found she likes we have half a dozen she won’t touch. You’ll likely need to try a bunch to find what yours will enjoy.

It’s not as rare as you may think. I used to work at a weather service office located right near the end of one of the runways at IAD and it would happen a few times a day if the airport was busy and the winds were such that they were coming in from our side.

Please keep in mind that you need to seal that print before you use it with food. Because of the layers, there’s are a ton of places for dirt and bacteria to hide that are impossible to clean. Additionally, depending on what kind of nozzle you used, heavy metals can end up in your print which you don’t want to then leech into your coffee. General advice is to just not use 3d prints first good, but if you really want to you should coat them in a food safe epoxy before using.

A lot of these depend on the model and where it’s installed (geographically and within the house). In many areas of the US, there is a drain in the floor near all water heaters as a matter of code, you can drain condensate directly to that (and unlike gas appliances, the condensate is clean and does not need treated to go in household drains). I honestly think the noise concern is hugely overblown and used as an excuse for people that don’t like change. Sure it exists, but if your water heater is in the basement or garage like the majority are at least in my areas of the US, you’ll never notice it. I also look at the cooling air as a benefit for at least half the year, I can close all the vents in our basement for the whole spring/summer and it’s super comfortable. In the winter it’s a tad chilly, but not uncomfortable. Drying the air is also great for our basement, it’s literally a dehumidifier in what’s usually a pretty damp location for many people. Ours (a rheem unit) has a flimsy plastic air filter you vaccuum off once a year as well so not really a huge deal. I think most are like this.

I agree that folks should do their homework and understand what they are getting. Heat pump water heaters are great, but are overpriced at the moment. Even with electric company rebates and a tax credit it cost more than a decent gas replacement would for us. It’s likely to only pay off because we have solar and so don’t really pay for electricity for a large chunk of the year. But I expect costs to come down over the next 5-10 years as these become the go to for most electric installs (and with fewer new gas hookups in new and renovated buildings that’s like to be most installs). Once these hit that $700-$1000 price point there’s really no good reason most people shouldn’t default to installing one.

They almost always have two high wattage resistive elements installed like a traditional electric water heater which require the 220v/30a circuit. The compressor runs on 220v but sips almost no real current while running.

YMMV of course, and will highly depend on how many people are in your house and how you use hot water, but a 50 gallon heat pump water heater easily supplies a dishwasher and two long showers with 1/3 of a tank of available water left in our house (and I take pretty hot showers that are not always as short as they should be). Sure, it takes an hour or two to fully recover but we aren’t ever looking to use much more hot water at one time. If you have a household of four, it may be a bit more of a problem, but then you can easily schedule other hot water uses to happen “off peak” like a dishwasher.

Idk, I DIY swapped out old gas water heater for an electric heat pump water heater heater and it was super straight forward. If you have the plumbing and electrical skills to add a circuit and move your hookups (since on most gas water heaters they are on top and most heat pump water heaters they are on the sides top and bottom), you probably have the skills to safely disconnect and cap off the old gas line. Just be sure to use pipe dope that is rated for gas, and check with soapy water once you pressurize the line again for leaks.

Or you can use something like Squarespace or Wix and have a fully functioning website with everything you need in a few hours and start monetizing your views with ads. Both start at $16 a month so it’s a larger hill to climb sure but you get custom branding and don’t have to deal with the baggage of a Medium page (largely that it’s considered in many circles an untrustworthy source for pretty much any topic mainly because of how easy and barrier free it is to write there. They also have a pretty well established history of working to screw over contributors to profit off of your work including you automatically giving a full license to medium for everything you post).

If all you want is a newsletter though without a webpage to back it you can setup something in mailchimp with a custom domain (.coms start at about $10 from cloudflare). Again an hour or so of reading and configuring and you’re on your way, with an Adsense account you can even embed inline ads to your newsletter.

I would recommend prowlarr instead of jackett for indexer management, and pihole as at least an additional blocking service but in reality it’s really all you need for use at home. I’d also strongly encourage use of a VPN on your *arr download services. I use a separate box to run Plex and then have my *arrs all running on their own VM inside if it to provide separation and allow be to more easily segregate the network traffic (as someone that doesn’t really know docker that well it “just works” for me. Also probably worth looking at how to store your media on an external target, it’s easy to quickly accumulate 10s of TBs of media and trying to store that all on the server locally is asking for trouble. Better to set everything up on a NAS to start.

I’ve not been formally diagnosed, but I’m 100% sure I have had ADHD. I talked with my parents about it a few weeks ago and they basically just said “yeah you probably have always had it, but we never argued your doctor about it”. The idea that I’m in my thirties and only recently really identified why I struggle with things is so infuriating. Worse yet is the fact that there were things that could have helped me succeed and be more comfortable in school is just the worst. I manage fine at this point with various strategies to be successful so it’s not really worth it to me to talk to my doctor and argue that I’ve always been like this, but man is it just hard sometimes.

Asking broadly like this is akin to asking for a guide on how to cook, it’s generally too broad for there to be a single guide. You first need to figure out what your goals are (you state one already, you’d like it to be externally accessible), determine what services you want to host, and then start looking at how to do so.

The advice I’d give is to start with a solid base, you’ll need something to self host on and it really shouldn’t be the PC you use for other things. Get it setup to run a virtualization OS such as proxmox and use that as your starting point. Then do a lot of reading. I spend probably three to four times as much time reading about the service I’m planning to deploy compared to actually doing the work to deploy it. Lastly, plan. You should have a solid plan in the beginning of how you want your service to work (what will be external vice internal only, how will you setup the networking stack to do that, are you going to have a domain, and will you use subdomains or folders to divide services, what does your IP space look like, will you host your own firewall to make the networking more controlled or fight with your ISPs router, do you want to use docker, kubernetes, or maybe full VMs for each service, do you want/need a UI to manage things from or are you comfortable with CLI, etc). These answers will lead you to guides for various services as well as service specific forums where help is more focused.

I’ve also never paid for a library card and I live in the US, so it’s clearly not always America. In fact most commenters here are noting they are paying small fees in euros so it seems this trend is common in Europe more so.

So I think the the big questions you need to answer before moving forward getting engineering quotes is what would you do with the space, how much is that worth to you, and are you in a position to take in the additional costs if it’s on the high end of what you consider worth it.

Even if it adds $100k of equity to your home, if you can’t afford to take on the debt, or have no real use of it beside adding square footage then it may not be worth the initial exploratory costs. On the same hand if you want more room for an office, kids room, etc, and are in a place to take on the extra costs then I’d call an engineer or three and ask about their costs and process.

I use protonmail with their family plan, it’s not terribly priced when you consider it comes with calendar, vpn, and drive storage as well. The biggest annoyance is probably that you have to use their mobile apps due to the encryption and they are not the greatest, but it does encrypt everything which I find outweighs the forced use of just their app.