![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/8286e071-7449-4413-a084-1eb5242e2cf4.png)
I’ve been using hardcover for a few months…great vibe, active development.
I’ve been using hardcover for a few months…great vibe, active development.
Lots of mentions for Obsidian. I’ll throw in my favorite for the past few years that’s similar: Logseq! Check it out!
Nice…I use Logseq, quite similar.
I’ve always held high hopes (albeit uninformed hopes) for carbon capture… Thanks for the links, looking forward to reading them.
Wow that worked like a charm, thanks for that. Kobo Aura 2 H2O edition 2, for the record
The Knowledge Project with Shane Parrish
Thanks for that link. I wouldn’t be surprised if this is my issue. I replaced a nozzle very recently and it seemed to improve things, but it quickly degraded. I also replwced the PTFE tube and likely did it wrong…though the symptoms existed before I replaced the tube. I also have a fan that has been on its way out for a while, so I could be getting heat creep. It could be a combo of all things. Either way, I have new fans on order and will be doing the rebuild. Thanks!
agh - I miss-clicked on edit and hit delete…I hope this repost doesn’t mess with something or someone. Sorry!
That’s a great article, thanks for the link. I had a suspicion that a ripple texture between lines is an indicator of too low, but it’s good to get that affirmation. I usually do a real-time final cal when it’s printing the skirt (micro up/down)
Usually just got water and soap.
I gotta say a big thank you to everyone that responded. Your encouragement for me to take a breather and regroup with a cool head was much needed. Thank you all kind strangers :-)
Someone else mentioned a G10 printing surface. Any idea what’s better for PLA? Or what’s the difference between the two?
Gahhhh same thing… I’m on day 4 of this bs. I’m gonna throw my printer out a window
ok ok, I’ll put the old bed on after I wash it real good…I do this periodically but maybe I was eating chips or something.
I’ve tried raising and lowering the z-offset…higher just makes it more angry and lower doesn’t get to the point that it fixes it
I’ve heard of using gluestick…but dang it sounds messy. Do you have a link to the stuff you tried?
I forgot that I had a spare glass bed, still in box…I put it on and tried the same print with the same results…the curl!! I tried printing at both 190 and 200 on the head, 55 and 60 on the bed…still the same.
Ok new symptom: the corners of a box that I’m printing are curling up
Ok, I have an incoming Lenovo M93P SFF to upgrade my really old laptop as a server, so your list will be super helpful. Thanks!
Correct, not self-hosted. The advantage is it comes with a book reading community :-)