This is the second time this has happened. It looks like it added part of the model on to the side. Is it my slicer? I’m using a Creality Halot Mage, and Chitubox 1.9.5 because that is the only slicer I’ve gotten to work on Fedora that supports my printer that I’ve found. I’m completely new to all things 3d printing. This is my first printer and that is my sixth print in the picture.

  • InEnduringGrowStrong@sh.itjust.works@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    1
    ·
    11 months ago

    If that model is one of the flat wallets I’m thinking about, it probably makes a pretty decent amount of suction cups even standing up.
    In other models, you can get away with it by adding vent and drain holes, but that may or may not be OK for that model.
    Honestly, for the wallet stuff, I’d probably print on an fdm printer more than a resin one.

    • A7thStone@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      11 months ago

      I see what you are saying. I never thought about that. Unfortunately I don’t have an fdm, but I’ll keep the suctioning in mind for future prints.