• 3 Posts
  • 21 Comments
Joined 1 year ago
cake
Cake day: July 5th, 2023

help-circle
  • It has to do with link priority on the server. You’d imagine that a server that receives a packet that has a return address on the same subnet as it self logically would use that interface instead.

    A similar thing happens in switches. For example if you have two vlans on a switch and both vlans have an ip assigned, connect a computer to one of the vlans. You will only be able to reach the switch on the non-routed connection. Even if you also are allowed to reach the second vlan through a router/Firewall.





  • “mainstream media” - you mean like this echo chamber? I literally never would have heard of this nonsense if if wasn’t for Lemmy. So yes, i would gladly have ignored the stupidity for what it is, stupid. Acknowledge the stupidity of it and move on. I’d much rather talk about the thousands of good things that the Olympics bring out. Like her winning after likely practicing her fucking ass off and putting life on hold for this one dream.









  • teslasaur@lemmy.worldto196@lemmy.blahaj.zonerule
    link
    fedilink
    arrow-up
    2
    ·
    4 months ago

    No, not really?

    In this case it’s a response to a pretty obnoxious comment. You could argue that the comment op is acting like an apple fan, ms fan or any kind of thing fan that enters a conversation.

    It can’t be answered in this context, cause there is no context in the post.





  • By making a bridge in the opensense interfaces you have created a layer2 network. This means that all the devices connected on that network are broadcasting their Mac addresses and are added to the ARP table on the opensense. Since they all are on the same physical network and the same subnet, none of the traffic will ever hit the layer 3 rules on your opensense.

    If you want opensense to handle the rules of the traffic you will need to put the devices on different subnets and separate clans. Create a gateway address for every vlan on the opensense and point your devices to the opensense as their gateway.



  • Vad du än gör så ska du inte köpa en “gaming”-stol. Gamers Nexus hade en bra video om ämnet. https://youtu.be/9Yhc6mmdJC4?si=UyoFdMoo4f8ueRSV

    Jag blev väldigt nöjd efter att ha köpt en stol med en mesh istället för tyg/läder, men det har sannolikt ingen inverkan på stödet för ryggen. Kinnarps har jag haft på kontor tidigare och de är inte särskilt bekväma. Vissa har rent utsagt haft skitdålig kvalitet och börjar gnissla efter kort tid. Hermann Miller är nog ett gott val som allt annat i den prisklassen.

    Mitt tips som inte har att göra med stolarna är att du kör lite streschövningar för att lätta på trycket i ryggen. Eftersom att sittade position leder till att vissa muskler blir kortare och att andra blir längre så måste du sträcka ut de kortas. Annars kommer belastningen att hamna på musklerna som måste motarbeta i.e. ryggen

    Stretcha höftböjarna och hamstring, samt stärk sätesmuskeln med någon bra övning så kommer du att få mycket mindre stress i ryggmusklerna.


  • Expensive is relative. Systembolaget is so huge that they have incredible deals with certain vendors and makers. I know fo a fact that most single malt whisky from scotland are cheaper to buy from systembolaget as compared to a Tax Free shop abroad. Beer and (usually)cheap wine however is pretty expensive due to the added alcohol tax.