The cool thing about 1310nm light is that it will pass down either multimode or single mode fiber.
At that short of a distance, you should be able to use MM 1310nm SFPs.
As long as the SFPs can do the signalling speed needed by the link then I see no reason why it shouldn’t work.
deleted by creator
deleted by creator
I don’t know. Some online forums are kind of sus, if you know what I mean. ;-) Usually, the ONT and the OLT are made by the same manufacturer ie: Alcatel Lucent. That means they are a matched pair because they speak their own digital dialect. Therefore, if you change the ONT then you are not guaranteed that they will understand each other.
In other words, I don’t recommend it.
That ONT is going to be a managed network endpoint. Their head-end system talks to it and sets up the configuration for the optical pathway. It is essential that it is not removed. If you replace it with something else then you will not get service.
I believe that you should be able to replace anything else downstream from the ONT. So that router can be replaced with whatever can handle the traffic flow. If it were my setup then I would replace it with my pfsense firewall box.
By the way, is this the kind of fiber cable you were thinking of? https://a.co/d/iJ0guG1
In 1999, I bet he was running Gentoo.
Altium
Hahaha!!! You are soooo very right!!!
If anyone is wondering, that glass diode package is called a MELF. I don’t know why.
They suck because they roll off the PCB during the pick and place process due to low surface area contacting with the solder paste.
I’ve had to replace so many of them.
I have a Green Mountain pellet smoker and it has a wifi enabled controller on it.
I know it’s not the same thing as your pellet stove but it has all the same elements. They just do a different process.
Maybe you could copy parts of its functionality into your own design.
At least, it could inspire your design.
I use a 50/50 mix of isopropyl alcohol and white vinegar. I drip about ten drops in one ear, let it sit there while I read a book on my side. Then I catch it all with a Kleenex tissue as I rotate my head.
This works great on ear infections too.
I believe that Proxmox does this because I have installed/created containers from their available images. I wonder how they create those container images?