Exactly what I do with my ancient series 3, I have had no issues unless I forget my charger. I can go maybe 36 hours before a charge, closer to 30 if I do a few workouts.

That all being said, my fiancée and a friend both have series 3s that can’t even stay alive for 12 hours. I had my watch for a year longer than they did, so it’s not an age thing, I just think the batteries are very hit or miss.

Used Airalo in the EU last year, only complaint was it took a few hours for the data to work reliably, but it was 100% after that. I’ve recommended it to everyone I know traveling.

I live in a really dry climate, so I don’t really notice issues unless I have a spool out on the printer for months, and even then dust is more of an issue than humidity.

To be safe, I bought a storage bin with a gasket on the lid that I store all of my other spools in, and that has seemed to work great.

I’ve been downloading my favorite AH videos all day in case WB decides to pull content, with their history you never know. I was looking into setting up a local NAS last weekend, and all these videos might be my push, I think I’m up to 250 GB downloaded (shoutout to youtube-dl) with the long 1080p60 files, hopefully I can cut that down with some HandBrake trickery.

The writing was on the walls for a while, Achievement Hunter breaking up was a huge red flag, but definitely not the first sign. I have only really consumed their podcasts for the last few years, and it sounds like The Roost will continue for now while WB looks for a buyer, but I think we have to wait for their stream tomorrow to find out what that means in terms of what productions if any are going to continue.

I have used 1Password with the annual plan for years across various browsers and operating systems and have found it to be perfect for everything I need. I will definitely take a look at Proton though.

I don’t think I would have purchased it, but it was a blast to play with PC GamePass. Had a solid weekend where I couldn’t put it down, eventually I got into a loop of just going egg hunting and waiting for them to hatch and uninstalled because I was finally burned out.

I will hold onto my $700 3080 until it spits fire, cannot believe I was lucky enough to get it at launch.

I use Photopea all the time, I love it because the UI is almost an exact copy paste of PS, my only complaint is I wish they had a lifetime license to get rid of that side bar ad, the only options are all subscriptions/monthly. And I know the donate page literally says they don’t do subscriptions, but what else do you call a one time payment for 30 days of ad free?

Ad block works to block the ad, but I haven’t found a way to get that screen space back.

Yep, they’ll definitely stick to the blue green system that already exists, threads with greens will just be improved from what they were/currently are

I saw someone else also suggest it, you could do an automatic fire extinguisher.

This one dispenses after 3-5 seconds of direct flame contact, others will be different.

I have seen some simple solder equipment and supplies at Home Depot and Lowe’s in the last year, usually with the other electrical wiring and equipment. Of course, you still have to go out to a store and hope that they have something, because I have found both to have unreliable in stock information, but it can’t hurt if you need something same day.

I had professors do different wordings for questions throughout college, I never encountered a professor or TA that wouldn’t clarify if asked, and, generally, the amount of confusing questions evened out across all of the versions, especially over a semester. They usually aren’t doing it to trick students, they just want to make it harder for one student to look at someone else’s test.

There is a risk of it negatively impacting students, but encouraging students to ask for clarification helps a ton.

Keep in mind that the sub count you see is the number of subscribers from your instance. I see 9.3k from my lemmy.world account, 250ish from my lemmy.ml account, and 300ish from my lemm.ee account.

Not sure how/where OP sees 12k though.

I have been working on costume parts, my process with split pieces is first assemble with painter’s tape to get a test fit, disassemble, super glue the pieces together with locktite gel control, sand with 80 and then 220 grit, paint with rustoleum 2-in-1 sandable filler, fill in gaps and seams with bondo glazing spot putty, sand the entire thing with 220, and then repeat paint-bondo-sand until I am happy with the surface before I move onto actually painting.

Basically this process.

If I don’t want to paint something, and don’t care too much about layer lines, I’ll usually use super glue and then a wood burner to melt the edges together. It isn’t the prettiest, but it works fine.

This helped a ton for me, I opened a second savings account for travel/vacation savings and I have thought about opening another checking to separate “fun” money from expenses money.

Some banks make it really easy, where you can freely create sub-accounts for each bucket of money, but it seems like a majority make you apply for each account. In my experience, the application gets instantly approved, but it makes it seem harder and scarier than it really should be.

I think your link is broken, https://docs.actualbudget.org/ doesn’t load anything for me, but https://actualbudget.org/docs/ does

I have had too many times where I have been confused trying to figure out a giant nested loop because the writer used i/j/k or x/y/z. It’s even worse when they confused when a particular bug is because they confused what their single letter variables were and used j somewhere instead of i and no one caught it because it is so easy to brush over. Name your stuff what it is, make your life easier, make others lives easier.

I have had 100% success sealing PLA prints used as plant pots (I know OP is asking about PETG, should still work) with a can of rustoleum spray lacquer, much easier than trying to dial in settings.