Yes they do. It’s called an electric motor. But that requires revitalizing infrastructure in order to accommodate fast charging across an urban landscape so utility trucks can top up whenever needed. And, of course, a company like Cummins being willing to make them.
It’s called walking, better than any car. Having cars in major cities is so stupid. And before you say contractors need to have trucks, sure the do. But, I’m tired of companies sending out service vehicles to make almost 200 mile round trips, just so the competitor doesn’t get the job.
I’d love for cities to go full on mass transit. Even bringing in light freight to business areas so restaurants and the like could just use a handcart. But there’s a lot of people and businesses in the US that will never cover.
Although these trucks are regularly bought just for vanity, they’re also the go-to trucks for cross country hauling. And regardless of infrastructure, current electric tech doesn’t do so hot there.
Although, part of their draw compared to others in their class was that they had the “best engines”…
You still need to get that electric from somewhere and like half the country still runs on either coal or oil.
Earlier this year I saw that NY State is outlawing gas stoves and gas and oil (hot water) heaters in new residences. The funny thing is that NY State gets over 50% of its energy from oil fired energy plants. So instead of smaller places using gas and oil maybe a few times a day, they’re going to be putting increased loads on an already stressed system (at least in the case of NYC, where this is largely targeted since it contains a good amount of the state’s population). They’re not really helping anything.
Electric appliances are generally more efficient than appliances powered directly by non renewable sources though. And a single oil/gas powerplant is probably more energy efficient than thousands of individually gas and oil powered appliances. So just changing to electric appliances will already reduce emissions.
And it sets the city up to upgrade to renewable energy in the future.
Sadly, no. Your electric heater is 100% efficient, yes, but that thermal power plant is lucky to hit 50%, especially if it’s old tech which many are.
On the other hand, burning natural gas at the point of use can be done at 95% efficiency by a condensing boiler or furnace.
That’s not even taking into account transmission losses. With them in play, even a ground-source heat pump has higher emissions than a natural gas furnace.
The only way electrification of heating makes sense is to decarbonise the grid, which should be the first priority. Nuclear and hydro baseload with solar/wind peaking and elastic loads and load shedding to take advantage of the variable supply.
You can’t complain about electricity loses without considering natural gas losses, especially the affect of methane on global warming
Why would you have to do one thing, then the other? Everyone agrees we need to both electrify homes and de carbonize the grid. However we also realize both are a long complex, expensive transition with many many pieces. It only makes sense to do both at the same time: an electrified house already reduces its impact on global warming, and just keeps getting better over time as the grid continues to be de-carbonized
Since we’re talking efficiency I’m sure you also know that several smaller consumers are gonna be far less efficient than one big consumer.
I’m not sure where you’re getting that information about a heat pump being worse than a literal fire burning furnace but that fire burning furnace is still less efficient as a small appliance than the power generation. What’s also important here is the heat pump can run on natural gas electricity, nuclear electricity, hydro etc. it is energy agnostic which the furnace is absolutely not.
You are burning fuel, turning a temperature differential into motion, into electricity, transmitting the electricity, then turning it back into a temperature differential.
In the specific application of heating, it makes far more sense to burn the fuel on site, where you are running at far lower temperatures and capable of condensing the exhaust to hit 95% efficiency.
I’ve worked with heat pumps, even built my own custom unit and I know that with the right refrigerants, low temperature distribution and oversized ground loops you can hit as high as a COP of 7. But the average affordable crappy air sourced unit is more like 2-3 and in a Canadian winter will not function at all, falling back on resistive heating at COP 1. And let’s face it, nobody has $20-50k for an amazing oversized ground sourced system and a rework to hydronic floors. They’re buying a reversible mini-split, DIY installing it and being disappointed when their heating bill goes up.
So with a COP of 2 and a power plant efficiency below 50% you are not even back to where you started if you were just burning the fuel in a furnace. And that’s best case, perfect conditions at the plant, no transmission losses, warm day, no Iosses in the heat pump.
It gets worse if your power comes from burning coal like ours does.
I’m just saying there’s no perfect drop-in solution, you can’t just handwave heat pumps in as a magic problem solver. In many cases there are bigger gains to be had from efficient furnaces than a massive electrification program, at least in the short to mid term.
Thanks for your comment. Very informative and insightful.
However, your argument only works when electricity is sourced from 100% non renewable sources. If your city power uses some hydro, nuclear or other renewable sources, the efficiency of electric appliances goes up and will likely be at least comparable with the average gas powered home appliance. And it will keep going up as power plants become renewable and thermal plants are decomissioned.
We should be moving away from gas and oil entirely instead of just saying “no one can install these in your homes anymore”, it’s just shifting the load.
If you insist on waiting for that magical “silver bullet”
That will fix everything with no downside, you’re not getting anywhere. You’ll never improv. Things will never get better. You’re frozen in over-thinking.
“No more new gas hookups” is a tiny step forward. By itself, not too significant and would take over a century to have an impact. Nevertheless, it is a step forward. As we talked more such steps, we’ll be able to move right along
You could also argue “no new gas hookups” as a consumer protection thing, whatever is the consumer of that. You’re saying that we don’t expect the new infrastructure to be productive long enough to justify the cost
Then there’s the medical impact, at least for inside appliances. You may try to argue it but the best medical knowledge has a strong correlation of childhood asthma and other lung problems with indoor gas appliances.
The problem is “public health” vs “private funding from businesses with interest” and we know the latter almost always wins. It’s two steps forward and one step back, which is still progress, but self defeating progress.
True, but we both know that the oil and gas industry has a stranglehold on the US in pretty much every way, shape, or form. It seems like this is just another “look we’re doing something good for the environment!” when in reality it’s just “theater”.
You probably don’t know that having a gas stove in your house is the benzene/cancer equivalent of a cigarette smoker sitting in your fucking kitchen blowing smoke in your face while you cook dinner.
The problem is that tens (or probably hundreds) of thousands of gas stoves and oil burners still exist and are used daily, this also doesn’t cover restaurants or commercial businesses, so the impact is pretty minimal.
Your “B” suggestion is hilarious because if they wanted to they could have done it already, there are (at least) two nuclear reactors in NY State IIRC, but they have been constantly blocked at every turn from building new ones for the past few decades by the oil and gas industry. Hydroelectric plants are already in use, along with wind turbines. If it was as simple as “build renewable power plants” don’t you think we would have done that everywhere by now (where it’s feasible, obviously)?
So because we haven’t done it yet, we shouldn’t do it now? That’s just the inverse of we do it this way because we’ve always done it this way. Both are piss poor reasons not to change now.
Yes they do. It’s called an electric motor. But that requires revitalizing infrastructure in order to accommodate fast charging across an urban landscape so utility trucks can top up whenever needed. And, of course, a company like Cummins being willing to make them.
But we can’t get off that oil teat.
It’s called walking, better than any car. Having cars in major cities is so stupid. And before you say contractors need to have trucks, sure the do. But, I’m tired of companies sending out service vehicles to make almost 200 mile round trips, just so the competitor doesn’t get the job.
This is about utility vehicles, which are needed in cities even with robust transportation systems. Cargo still needs to be hauled the last mile.
Okay and everywhere else?
I’d love for cities to go full on mass transit. Even bringing in light freight to business areas so restaurants and the like could just use a handcart. But there’s a lot of people and businesses in the US that will never cover.
Although these trucks are regularly bought just for vanity, they’re also the go-to trucks for cross country hauling. And regardless of infrastructure, current electric tech doesn’t do so hot there.
Although, part of their draw compared to others in their class was that they had the “best engines”…
You still need to get that electric from somewhere and like half the country still runs on either coal or oil.
Earlier this year I saw that NY State is outlawing gas stoves and gas and oil (hot water) heaters in new residences. The funny thing is that NY State gets over 50% of its energy from oil fired energy plants. So instead of smaller places using gas and oil maybe a few times a day, they’re going to be putting increased loads on an already stressed system (at least in the case of NYC, where this is largely targeted since it contains a good amount of the state’s population). They’re not really helping anything.
Electric appliances are generally more efficient than appliances powered directly by non renewable sources though. And a single oil/gas powerplant is probably more energy efficient than thousands of individually gas and oil powered appliances. So just changing to electric appliances will already reduce emissions.
And it sets the city up to upgrade to renewable energy in the future.
NY apartments also notoriously have zero ventilation
Sadly, no. Your electric heater is 100% efficient, yes, but that thermal power plant is lucky to hit 50%, especially if it’s old tech which many are.
On the other hand, burning natural gas at the point of use can be done at 95% efficiency by a condensing boiler or furnace.
That’s not even taking into account transmission losses. With them in play, even a ground-source heat pump has higher emissions than a natural gas furnace.
The only way electrification of heating makes sense is to decarbonise the grid, which should be the first priority. Nuclear and hydro baseload with solar/wind peaking and elastic loads and load shedding to take advantage of the variable supply.
Since we’re talking efficiency I’m sure you also know that several smaller consumers are gonna be far less efficient than one big consumer.
I’m not sure where you’re getting that information about a heat pump being worse than a literal fire burning furnace but that fire burning furnace is still less efficient as a small appliance than the power generation. What’s also important here is the heat pump can run on natural gas electricity, nuclear electricity, hydro etc. it is energy agnostic which the furnace is absolutely not.
That’s the point I’m making. It’s counterintuitive. They are actually far more efficient, even though that “feels wrong”.
Thermal power generation is limited by the Rankine cycle https://en.m.wikipedia.org/wiki/Rankine_cycle with a MAXIMUM efficiency of only 42%.
You are burning fuel, turning a temperature differential into motion, into electricity, transmitting the electricity, then turning it back into a temperature differential.
In the specific application of heating, it makes far more sense to burn the fuel on site, where you are running at far lower temperatures and capable of condensing the exhaust to hit 95% efficiency.
I’ve worked with heat pumps, even built my own custom unit and I know that with the right refrigerants, low temperature distribution and oversized ground loops you can hit as high as a COP of 7. But the average affordable crappy air sourced unit is more like 2-3 and in a Canadian winter will not function at all, falling back on resistive heating at COP 1. And let’s face it, nobody has $20-50k for an amazing oversized ground sourced system and a rework to hydronic floors. They’re buying a reversible mini-split, DIY installing it and being disappointed when their heating bill goes up.
So with a COP of 2 and a power plant efficiency below 50% you are not even back to where you started if you were just burning the fuel in a furnace. And that’s best case, perfect conditions at the plant, no transmission losses, warm day, no Iosses in the heat pump.
It gets worse if your power comes from burning coal like ours does.
I’m just saying there’s no perfect drop-in solution, you can’t just handwave heat pumps in as a magic problem solver. In many cases there are bigger gains to be had from efficient furnaces than a massive electrification program, at least in the short to mid term.
Thanks for your comment. Very informative and insightful.
However, your argument only works when electricity is sourced from 100% non renewable sources. If your city power uses some hydro, nuclear or other renewable sources, the efficiency of electric appliances goes up and will likely be at least comparable with the average gas powered home appliance. And it will keep going up as power plants become renewable and thermal plants are decomissioned.
We should be moving away from gas and oil entirely instead of just saying “no one can install these in your homes anymore”, it’s just shifting the load.
If you insist on waiting for that magical “silver bullet” That will fix everything with no downside, you’re not getting anywhere. You’ll never improv. Things will never get better. You’re frozen in over-thinking.
“No more new gas hookups” is a tiny step forward. By itself, not too significant and would take over a century to have an impact. Nevertheless, it is a step forward. As we talked more such steps, we’ll be able to move right along
You could also argue “no new gas hookups” as a consumer protection thing, whatever is the consumer of that. You’re saying that we don’t expect the new infrastructure to be productive long enough to justify the cost
Then there’s the medical impact, at least for inside appliances. You may try to argue it but the best medical knowledge has a strong correlation of childhood asthma and other lung problems with indoor gas appliances.
The problem is “public health” vs “private funding from businesses with interest” and we know the latter almost always wins. It’s two steps forward and one step back, which is still progress, but self defeating progress.
That’s never been how technology shift or legislation works though. Everything comes in phases.
True, but we both know that the oil and gas industry has a stranglehold on the US in pretty much every way, shape, or form. It seems like this is just another “look we’re doing something good for the environment!” when in reality it’s just “theater”.
You probably don’t know that having a gas stove in your house is the benzene/cancer equivalent of a cigarette smoker sitting in your fucking kitchen blowing smoke in your face while you cook dinner.
I’ve seen that referenced like once before. I don’t see you backing that up, only getting angry.
https://pubs.acs.org/doi/10.1021/acs.est.2c09289
Thanks
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7431055/
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2764546/
A. That powerplant is far more efficient
B. There’s no reason NY can’t change to renewable sources.
The problem is that tens (or probably hundreds) of thousands of gas stoves and oil burners still exist and are used daily, this also doesn’t cover restaurants or commercial businesses, so the impact is pretty minimal.
Your “B” suggestion is hilarious because if they wanted to they could have done it already, there are (at least) two nuclear reactors in NY State IIRC, but they have been constantly blocked at every turn from building new ones for the past few decades by the oil and gas industry. Hydroelectric plants are already in use, along with wind turbines. If it was as simple as “build renewable power plants” don’t you think we would have done that everywhere by now (where it’s feasible, obviously)?
So because we haven’t done it yet, we shouldn’t do it now? That’s just the inverse of we do it this way because we’ve always done it this way. Both are piss poor reasons not to change now.
https://www.nyserda.ny.gov/About/Publications/Energy-Analysis-Reports-and-Studies/Electric-Power-Transmission-and-Distribution-Reports/Electric-Power-Transmission-and-Distribution-Reports---Archive/New-York-Power-Grid-Study/Story-of-Our-Grid#:~:text=70%25 of this electricity comes,resources that include nuclear generation.