I have a fungus gnat problem with my houseplants, I’ve kept them relatively under control using Mosquito Dunks in my watering can since August and some yellow sticky traps but I can’t seem to eradicate them. I was considering buying nematode pot poppers but I’ve never used them before so I was wondering if anyone had any tips for application. All my plants are still relatively small so I don’t have many large pots for any of them (most are between 4-10").

Any and all recommendations welcome, having pests is really taking all the joy out of having plants. I’m in Canada so a lot of pesticides aren’t available to me.

UPDATE: I figured I’d update this post incase someone comes looking for solutions and sees this. I ended up going with a top layer of silica sand (2-4 mm in size) on all of my pots. I continued with the BTI water, let my plants completely dry out between waterings, and bottom-watered most of my plants. I haven’t seen a fungus gnat in about 2 weeks so I think I have been successful in eradicating them. Will update again if this changes.

Update 2: I take back the update, they’re still here… I’m so over the freaking gnats.

  • Vimes@ttrpg.network
    link
    fedilink
    English
    arrow-up
    6
    ·
    11 months ago

    I had the same issue w being unable to eliminate them entirely for ages. Putting a layer of sand over soil in pot was what finally completely resolved it for me (in addition to continuing all the other stuff you mentioned).

      • Funkymatt@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        edit-2
        11 months ago

        I also had success with sand on top, a couple cm is fine- just enough to completely cover all visible topsoil. You may also want to start bottom watering if you can and leave the top undisturbed since the sand will migrate when you top water. You may need to reapply sand periodically so get a decent sized bag.

        You may need to rethink your watering schedule for a bit too, fungus gnats love wet soil. Those yellow cards can help track population, change those out regularly (another pro tip is to cut them down to smaller pieces since you’re not actually trying to control the population with the cards)

  • P7uen@beehaw.org
    link
    fedilink
    English
    arrow-up
    4
    ·
    11 months ago

    Nematodes, 100%. Went from clapping flies around me every 2 minutes to nothing, absolute godsend.

    Order them online for around 20 dollars, follow the instructions and mix it in when you water them next. They eat the fly eggs or something, whatever it is it works within a couple of days and lasts a long time. I do this whenever the flies start coming back, maybe every month or two, and after a round of repotting because of the new soil.

    I also cover the tops of pots with tape facing down which helps restrict access to the soil and some of the flies will stick to it, but I will try the sand layer instead of that now based on the suggestion above.

    I hope this helps, I tried a lot of things before I found this and feel your pain!

  • Beegzoidberg@beehaw.org
    link
    fedilink
    English
    arrow-up
    3
    ·
    11 months ago

    A comment I read spoke of getting carnivorous plants to help, and now I like having gnats around to feed them! I have three sundews and they capture a lot of gnats.

    • Polkira@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      11 months ago

      I was considering sundews and was actually just checking for some at my local nursery but only saw venus fly traps and pitcher plants. I also don’t know if I’d be able to keep a sundew alive, how have you found the care for them? I’d say I’m still intermediate with skill level, I only started keeping more than 1 plant in April (up to ~50ish now but most were cuttings from friends so they’re all still fairly small)

      • Beegzoidberg@beehaw.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        11 months ago

        I think they’re easy! I only use rainwater or distilled, I leave about 1/2 an inch of water in the tray, I keep them under a grow light, and that’s it so far. They propogate easy too. I’d recommend watching some YouTube videos on their care, and order one online if it’s not too cold yet. The three I have are my favorites of the collection

  • spacemoss@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    11 months ago

    I’ve been mixing mosquito bits in the pot/soil with great success. I toss in a handful about every 6 months. When I repot, I mix in roughly 1/2 cup per 4 quarts soil medium. Make sure the top inch of soil has a chance to dry out between watering. Make sure you don’t have water standing in your catch trays when watering. Switch out for aggregate clay or lava rock instead of a soil medium.

    • Polkira@lemmy.caOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      11 months ago

      Unfortunately mosquito bits aren’t available in Canada. I’ve been letting them dry out between so I’m surprised they just come right back, I’m wondering if it’s to do with my plants all being watered at different intervals so there’s always at least one plant that has moist soil. Would the clay/rock work for all plant types? I’ve been using 1 part perlite, 1 part potting mix, and 1 part orchid bark for most of my plants since it tends to stay more humid where I am and takes forever to dry otherwise. The few succulents I have are mostly in 50/50 perlite and cactus mix.

      • spacemoss@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        11 months ago

        I wonder if you can break up masquito dunks, aren’t they the same chemical? I have not had success with ferns in clay but epiphytes and ficus seem to love it.

        • Polkira@lemmy.caOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          11 months ago

          I could try that, I think I’ll try the sand tip first to see if that helps before repotting everything (been trying to avoid that since it’s such a huge undertaking at this point). I only have the one fern, I have a bunch of epiphytes (a bunch of pothos, couple hoyas, a small monstera, etc.), no ficuses. I was considering switching my alocasias to leca but was intimidated by the change in care, I’ll have to do some reading up on it.

          Would watering for clay basically be the same as soil? water when dry?

          • spacemoss@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            11 months ago

            I agree, sand would be best to try first.

            Clay watering is a little different, you’ll need to use two layer pots where the outside pot is water tight and the inside pot has holes. Clear pot inserts work best. Before watering you’ll have to check if the bottom is still wet and add water & food upto just below the roots. What you are aiming for is to add the exact amount of water the clay can obsorb.

  • smeg@feddit.uk
    link
    fedilink
    English
    arrow-up
    2
    ·
    11 months ago

    Ugh, bane of my life! I found diluted hydrogen peroxide worked, though you need to make sure you’ve got good drainage because after killing everything it leaves the soil very damp which is ideal for any survivors. Quarantining the infested plants in a separate room and not watering them helped, though this was with cacti so they managed to survive the drought!

  • Shadow@lemmy.ca
    link
    fedilink
    English
    arrow-up
    1
    ·
    11 months ago

    Bottom watering and a layer of d. earth on top was the only thing that solved it for me.