My toilet, a few times a day starts running water for a few seconds then stops. How do I fix it?

  • Admiral Patrick@dubvee.org
    link
    fedilink
    English
    arrow-up
    8
    ·
    4 months ago

    That’s usually the cause and easy to check. Less often, the fill valve can be wonky and just kind of kick on by itself.

    If that’s the case, you’ll hear another sound while it’s filling where the excess water is going down the overflow drain inside the tank. That’s a harder fix as you have to replace the whole assembly, but it’s not too terrible; just more involved than replacing the flap.

    • bluGill@kbin.run
      link
      fedilink
      arrow-up
      3
      ·
      4 months ago

      If the valve (as opposed to flap) is gone that far, then a good modern water savings toilet isn’t that expensive and will probably flush better than the old one (good is key - there are many cheap toilets that don’t flush well!). Consider replacing the whole toilet instead. You can also get a toilet style you like (I personally hate high toilets, but some prefer them). I strongly recommend a bidet while you are doing this as well.

      I won’t say you should always replace the toilet vs just the valve, but it is something to consider - the effort is similar and the cost isn’t that much more. So if there is any reason to replace the toilet do it.

        • bluGill@kbin.run
          link
          fedilink
          arrow-up
          2
          ·
          4 months ago

          Wow, I’d expect it to last longer than that, even a cheap one. You might want some weter treatment, get the water tested to see if it is destroying parts.