Suddenly, things aren’t loading properly. For example Heimdall takes forever to load and Navidrome is timing out.

When I do docker-compose pull

It says says

Error response from daemon: Get "https://registry-1.docker.io/v2/" net/http: request cancelled while waiting for connection (Client.Timeout exceeded while awaiting headers)

Anyone know what’s up or how to fix it?

Edit: checking the /etc/resolv.conf

It says

search cable.virginm.net
nameserver 194.168.4.100
nameserver 194.168.8.100

Though neither are opening anything from a browser

Not sure if it’s helpful, but this is what the networking bridge says via Portainer

Network details

Name: bridge
Id: Oc3f5ce6ffc566ee80/1689056f11d491269849967877933858053581742-978
Driver: bridge
Scope: local
Attachable: false
Internal: false
IPV4 Subnet - 172.120.0/16: IPV4 Gateway - 172.17.0.1
IPV4 P Range: PV4 Excluded IPs


Access control

Ownership: public


Network options

com.docker network.bridge default_bridge: true
com.docker.network.bridge.enable.icc: true
com docket.network.bridge.enable_ip.masquerade: true
com docker.network.bridge.host_binding_ipv4: 0.0.0.0
com.docker.network.bridge.name: docker0
com.docker.network.driver.mtu: 1500

I suspect it may be this bug https://github.com/moby/moby/issues/47662

##Resolution Turns out it was just Virgin Media’s router doing shit. A factory reset of the router fixed my issues.

  • Justin@lemmy.jlh.name
    link
    fedilink
    English
    arrow-up
    3
    ·
    7 months ago

    Check for PSI stalling in htop (add PSI meters for cpu, ram, and io in the config menu), to rule out your system being overloaded. Check internet connectivity with ping 1.1.1.1, and see why registry is timing out with curl -v https://registry-1.docker.io/v2/

    You can also test your dns servers if you think that they are an issue with

    dig registry-1.docker.io @1.1.1.1
    dig registry-1.docker.io @194.168.4.100
    

    If the dig command outputs differ from each other, then it is likely that your ISP’s DNS servers are faulty and you should switch nameservers to 1.1.1.1 and 1.0.0.1 like the other commenter said.

    • sabreW4K3@lazysoci.alOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      7 months ago

      HTOP shows CPU, memory and IO all moderately low.

      Ping shows

      55 packets transmitted, 49 received, 10.9091% packet loss, time 54221ms rtt min/avg/max/mdev = 50.922/712.756/1784.732/378,340 ms, pipe 2
      
      • Justin@lemmy.jlh.name
        link
        fedilink
        English
        arrow-up
        3
        ·
        7 months ago

        Your internet/wifi seems really overloaded, average ping rtt should be under 100ms, not 712ms. Your wifi signal might be bad, a computer may be downloading/uploading a lot of data, or there is an issue with your internet line.

        Double check your wifi signal and computer traffic, maybe try using a direct wired ethernet connection and disconnecting all other computers. Otherwise, contact your ISP with these ping results and speed results from speedtest.net.

        • sabreW4K3@lazysoci.alOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          7 months ago

          Thank you. I ended up calling my ISP and their automation fobbed me off and recommended a factory reset of my router. That actually fixed my issues.

      • catloaf@lemm.ee
        link
        fedilink
        English
        arrow-up
        1
        ·
        7 months ago

        Bruh you’re losing 10% of all packets, and the ones making it through are taking entire seconds? No wonder it’s not working. Check your physical network connections.