I was hanging a ceiling fan in this room when I discovered that the mounting screw holes in the electrical box are stripped. My dad has suggested using JB Weld putty, letting it cure, drilling it out with a small bit and then using wood screws. I’m a first time homeowner and have neither the confidence nor the expertise to completely replace the box. Is my dad’s route the best course of action or is it a waste of time and/or dangerous to go that route? Thank you!

  • ScottThePoolBoy@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    That’s good advice. I was going to say to use some sort of glue. Maybe a two part, 5 min epoxy. That’s pretty much JB weld. So, yeah.

  • SJ_Zero@lemmy.fbxl.net
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    Looks like a plastic box? I don’t think there’d be a huge problem with your dads proposed solution as long as the screws go straight up. One problem with it is it’s something that’ll fix the problem until the next time the box comes out. That might be never if you aren’t doing anything that’d need you to open the box again.

    I bet you could get a tap one size up and just cut new threads at one size larger too. Nice thing about that is you still have nice machine threads and the original material so you can remove the screws if you need to.

  • Infinitenonblondes@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Listen to your dad. Moving the hole won’t work since the fan is designed to fit a standard box. Alternatively you could replace the box, you’ll want an old work box.