I’m thinking about upgrading my W-Fi and I was curious what wireless access points (WAP) people are using. I’m currently using a Netgear R7800 running OpenWRT.

  • thelittleblackbird@lemmy.worldEnglish
    101·
    17 hours ago

    Fritzbox boxes.

    They tick all the checkboxes

    • good standards support (including dect protocol if you want to have an ip phone or even iot protocols)
    • fast wifi speeds
    • cheap (at least for the second hand in ebay)
    • super stable, never had a problem with them in 5 years or more
    • fast roaming support out of the box

    It is a well known brand in Germany but pretty unknown outside that country. Honestly it is the best bang for buck I was able to get.

    Honestly, I would spend 10 minutes checking on them

    • Elvith Ma'for@feddit.orgEnglish
      8·
      16 hours ago

      I really like them but they do have two downsides for “more advanced” users (or at least for me) - it is a home device as after all.

      1. No support for VLAN or VLAN tagging - you can set up you WiFi and a guest WiFi. You can also map the guest network to an Ethernet port. But that’s about it.
      2. There is no way to change the DNS suffix (*. fritz.box) to another value - I do own a domain that I use for the local services on my home server, etc. which then allows for Let’s Encrypt certificates, but I cannot use it “out of the box”.

      If you’re an advanced user, there’s plenty of ways around that, though. I just wished that these two thing were to exist in the firmware to have less work with my home infrastructure.

      • thelittleblackbird@lemmy.worldEnglish
        3·
        11 hours ago

        Totally agree with the first point, it is a limitation, and the guest wifi sticking to a eth port is just a patch. One that works but still a patch.

        But I don’t see the point of the prefixes. What do you mean? I also have a custom domain and a local dns server y can use the domain even internally. I just simple ignore that…

        • Elvith Ma'for@feddit.orgEnglish
          2·
          8 hours ago

          Yeah, I’m also using a local resolver. But since I had some problems using another DHCP server (which was probably a problem on my end), so I’m current setting some devices in my FRITZ!box to a fixed IP and then enter that in my DNS server. If I could just skip the second part and tell the FRITZ!Box to just resolve printserver.example.com instead of printserver.fritz.box - that’d be nice. Maybe I should do another try with a DHCP server soon.